Towel Rail Thermostatic Control Plate With Chrome Plate

Towel Rail Eco Thermostatic Control Plate TCP200/TCT200

Have full control of your Towel Rail Electric Element by wiring directly into this unique exclusive control plate in the bathroom. The TCP200/TCP200 Thermal Control Plate will serve you for many years, and is suitable for element sizes, 150W, 200W, 250W, 300W, 400W, 500W, 600W and 800W. Simple to use can be turned up or down by increasing / decreasing the touch pad buttons to attain the desired temperature setting. The TCP200 controller should be used with standard elements only!

There are 5 LED Lights; “One LED light indicates 20% of the total power being used” if all 5 LED lights are showing then the full power of the element is being used. This means if you have a 150W element fitted to the towel rail if only one LED light is showing the actual power being used is as little as 30W!

• The Thermal Control Plate TCP200/TCT200 Can be used on Dual Fuel Applications as well as Electric only.
• Used with a standard element only!
• Power On/off switch Activate the Element.
• The 2 hour Boost switches the Element to Full Power for 2 Hours, then reverts to previous setting.
• When TCP200/TCT200 is off and the 2 hour Boost is pressed, the Element will be activated on full power for 2 hours, then will switch itself off.
• Output controls (<) Left side to Decrease Power and (>) Right side to Increase Power.
• Every press of the right side (>) output control button illuminates 1 of the 5 LED lights, increasing the output by 20% stages, the left side (<) decreases in the same manner.
• IP55 Rated, Zone one bathroom installations
• Controls 150W – 800W Elements, Max 1000W
• Active 5 LED Display
• Size: W85mm, D32mm, D85mm, fits a standard electrical back box!
• Use silicon sealant to seal to standard back box
• Cable entry bottom